Solenoid repair kit for the original DSR Markers.

Including parts as on the description .

(Pilot not included)

FLEX FACE DSR BOLT

The Flex Face soft tip bolt Is a drop in upgrade, that requires no adjustments or tuning . The Flex Face bolt ensures the most fragile paint will be gently carried through the breach, and helps protect irregularly shaped paint from clipping. Designed to give the same level of breach seal and blow back prevention as a traditional o-ring, the Flex face Bolt also minimizing ball stack bobble and improves ball handling.

FLEX FLOW DSR CAN

The New Flex Flow DSR Can allows you to adjust the shot signature of your DSR. The Flex Flow Can is a drop in replacement upgrade, that requires no adjustments or tuning. Flex Flow allows you to choose between the already amazing standard shot or an even smoother ultra-soft shot. Simply choose to use the can with or without the flow restriction gland. 

• #013 N70 O-ring,ylw x3
• #014 N70 O-ring,blu x2
• #017 N70 DIA1.7 O-ring,Orange x4
• #020 N70 O-ring,grn x5
• #011 N70 O-ring,orange x2
• #015 N90 O-ring,purple x2
• 
  

• DSR Hyper6 Reg Spring x1
• DSR Hyper6 Reg cover,clr x1
• #008 N70 O-ring x2
• #010 N70 O-ring,purple x1
• #012 N70 O-ring,grn x1
• #014 N-70 O-ring,blu x1
• H6 Brass seat retainer x1
• H6 seat cover,clr x1
• h6 Molded Seat (hole 1.5) x1
• Pressure relief brass pad x1
• Pressure relief spring x1

Work for both DSR and DSR+

• Eye Wire x2
• Eye Seal x2
• Eye Pipe x2
• Ball Detent x4
• 03*06*t0.8 N70 Solenoid x10
• 1*6mm N70 Solenoid x4
• #006 N70 Airport x6
• #008 N70 Hyper 6/BOLT x5
• #009 N70 Hyper 6 x4
• #010 N70 Airport x4
• #012 N70 Hyper 6 x4
• #013 N70 BOLT x10
• #014 N70 BOLT x5
• #015 N90 BOLT x5
• #111 N70 BOLT x4
• FRONT GRIP LOCKING KNOB x2
• M2 On/Off BUTTON CLR x2
• #017 N70 BOLT x15
• #020 N70 x15
• Trigger Pin x4
• Trigger Cam Screw x8
• 6-32*1/4 Acrew Sticky Grip x8
• Bolt Tail Spring x2
• Bolt Door Gate Spring x4
• Trigger Spring x4
• Pressure Relief Brass Pad x3
• Pressure Relief Spring x3
• H6 Molded Seat x10
• 8-32x3/8" Flat Screw Body and Frame Mount x8
• M2*6 Screw Main Circuit Board x6
• M2*3 Screw Body Transfer Board/OLED x6

• DSR OLED board set x1
• DSR magnifying glass ,HC x1
• M2 on/off button rubber,NBR40 x1
• M2*3mm Flat head Screw x1
• M2 on/off button clr,(m+a) x1

Solenoid repair kit for the original DSR+ Markers.

Including parts as on the description .

(Pilot not included)

Solenoid Valve complete kit for DSR+ Markers Only

Including parts as on the image.

(Pilot is included. Pilot can work for both the original DSR and DSR+ Solenoid Valves)

Main circuit board kit for the original DSR / DSR+ Markers.

Including below parts:

• DSR Main Circuit board set x1
• DSR body transfer board x1
• M2*6 philips head screw x2
• M2*3mm Flat head Screw x2
• 2*1mm N70 O-ring x1

4th Gen Eye Pipe – Breech System

• 4th generation
• Durable self-cleaning system
• Protection from damaging breech wear
• New independent integrated leaf spring detents
• Eliminates bulky eye plates and small easily stripped mounting screws
• Includes 2 ball detents

DYE’s patented Eye Pipe System moves into its 4th generation of refinement with updated breech geometry and independent detents designed to accommodate a wide range of paint sizes including extremely small paint. There are many important features of the Eye Pipe System. It shields the anti-chop eye system from dirt and broken paint. The thick durable poly-carbonate pipe is wiped clean by the bolt tip o-ring on every cycle creating a self-cleaning operation that ensures the eyes are always monitoring the breech. Your marker stays protected from harsh environments eliminating permanent performance hindering breech wear. The new shape of the independent leaf spring detents are integrated into the Eye Pipe preventing double feeds and chopped paint, all while eliminating the need for bulky exterior eye plates.

Compatible markers:

• DLS
• M3+
• M3s
• DSR+
• DSR
• CZR

4th Gen Eye Pipe – Breech System

• 4th generation
• Durable self-cleaning system
• Protection from damaging breech wear
• New independent integrated leaf spring detents
• Eliminates bulky eye plates and small easily stripped mounting screws
• Compatible with M2, M3s, M3+, DSR and Rize Series markers

DYE’s patented Eye Pipe System moves into its 4th generation of refinement with updated breech geometry and independent detents designed to accommodate a wide range of paint sizes including extremely small paint. There are many important features of the Eye Pipe System. It shields the anti-chop eye system from dirt and broken paint. The thick durable poly-carbonate pipe is wiped clean by the bolt tip o-ring on every cycle creating a self-cleaning operation that ensures the eyes are always monitoring the breech. Your marker stays protected from harsh environments eliminating permanent performance hindering breech wear. The new shape of the independent leaf spring detents are integrated into the Eye Pipe preventing double feeds and chopped paint, all while eliminating the need for bulky exterior eye plates.

M3s Customers, please contact our Customer Service Department for more information on the 4th Gen Eye pipe and M3+ Bolt Upgrade system.